How to wear Vive Focus Vision?

To wear the Vive Focus Vision correctly and ensure optimal comfort and visual clarity, follow these steps:

1. Prepare the headset

• Top strap: Detach the Velcro fastener on the top strap.
• Rear strap: Press the quick-release button and gently pull the rear strap to fully extend it. If there is resistance, turn the adjustment dial counterclockwise to loosen.

2. Put on the headset

• Positioning: Place the headset on your face, aligning the lenses in front of your eyes.
• Adjust the rear strap: While holding the quick-release button, slide the rear strap until it sits comfortably at the back of your head.
• Fine-tuning: Release the button, then turn the adjustment dial until the headset is secure but comfortable.
• Top strap: Adjust the top strap so it rests comfortably on the top of your head, then reattach the Velcro fastener.

Additional tips

• Wearing glasses: Most glasses can be worn with the headset. When putting it on, gently press on one side of the facial cushion frame to help fit your glasses. Make sure your glasses do not exceed 150 mm in width and 55 mm in height.
• Removing the headset: To remove it, press the quick-release button to loosen the rear strap, then gently lift the headset off your head.