How to wear the Pico Neo 3 Enterprise/Pro (Eye)?

The Pico Neo 3 is designed to be worn stably and comfortably, even during prolonged use in professional, training, or demonstration contexts. Proper positioning is essential to ensure comfort, display quality, and safety.

1. Prepare the headset before putting it on

1. Loosen the adjustment wheel located at the back of the headset.
2. Check that the lenses are clean to avoid any visual discomfort.
3. Make sure that the cable, if connected, does not interfere with the fitting.

This preparation makes it easier to put on without applying unnecessary pressure.

2. Position the headset on your head

1. Place the headset on your face, aligning the lenses in front of your eyes.
2. Position the rear headband slightly below the back of your head for a better fit.
3. Check that the headset sits comfortably, without pressing excessively on your nose or forehead.

The headset must be centered to ensure a clear image.

3. Adjust the headset fit

1. Turn the rear dial until you achieve a firm but comfortable fit.
2. The headset should remain stable when you move your head, without feeling like it is slipping.

Excessive tightening may cause discomfort during prolonged use.

4. Adjust the display if necessary

• Slightly adjust the vertical position to improve sharpness.
• Check that the image is centered in your field of vision.
• Recenter the display if necessary.

To wear the Pico Neo 3 correctly, prepare the headset, position it correctly, and then adjust the fit using the rear dial. A well-adjusted headset ensures greater comfort, a sharper image, and safe use, especially during prolonged sessions.